.25" (6.35mm) Female Non-Insulated Disconnect 16-14 AWG Crimp Terminal 25pcs

Cinergy non-Insulated .25" female quick disconnect crimp terminals with a tinned brass contact receptacle with built in wire stop. This type of terminal goes by different names in the DIY audio world including 'quick connector', 'crimp terminal', or 'spade terminal'. They're designed to make hooking up your audio projects easier and for making a safe electrical junction between the cable and an electrical connection.

Installation Note:

• Prepare the wire: Strip the insulation from the ends of the wire you want to connect, exposing the bare wire. We usually recommend about .25" of exposed wire.
• Slide on the terminal: Place the female crimp terminal over the exposed wire. Make sure the wire is fully inserted into the terminal, with the wire insulation sitting against the base of the terminal.
• Crimp the terminal: Use a crimping tool or a pair of strong pliers to crimp the lower barrel of the terminal onto the wire. This will secure the wire inside the terminal. Ensure that the crimps are tight enough to secure the wire inside the terminal.
• Secure the connection (optional): You can use a small amount of electrical tape or a heat-shrink sleeve to wrap around the base of the terminal.
• Test the connection: Give a slight tug on the crimp terminal and wire to be sure they are fully connected and secure.

Cinergy Specifications